Ford Falcon FG/FG-X Carbon Fibre Shifter Surround Overlay

Real carbon fibre overlay for the automatic FG and FG-X console.

Pre-order notice: Gloss Twill and Gloss Forged are on pre-order for the current batch, shipping early December 2026. Matte Twill and Matte Forged are in stock and ship within 1 to 2 business days. Orders that mix a pre-order finish with an in-stock part ship together once the batch lands. Afterpay is not available on pre-order finishes.

It sits over your factory shifter surround and bonds with automotive double sided tape. Nothing gets cut, drilled or removed, and the original trim stays untouched underneath.

• Fits: automatic Ford Falcon FG (2008 to 2014) and FG-X (2014 to 2016)
• Does not fit: manual cars, see fitment below
• Install: peel and press, about ten minutes, no tools
• Finishes: gloss twill (pre-order), matte twill, gloss forged (pre-order), matte forged

Pick your finish

• Gloss twill (pre-order): the classic 2x2 weave under a deep gloss clear.
• Matte twill: the same weave under a satin clear, closer to a factory look.
• Gloss forged (pre-order): random marbled pattern, no two pieces the same, full gloss.
• Matte forged: forged pattern under a satin clear, the stealthiest of the four.

All four are genuine carbon fibre with a UV resistant clear coat. Neither twill nor forged is better, it comes down to the rest of your interior.

How to fit it

1. Clean the factory surround with isopropyl alcohol and let it dry fully.
2. Dry fit the overlay first and check the alignment. Do not peel the tape yet.
3. Peel the tape backing.
4. Line it up and press it down firmly from the centre out to the edges.

Almost every overlay that lets go later does so because the surface was not clean and dry. Take your time on step 1.

FAQ

When does a pre-order finish ship?

The current gloss batch is due early December 2026. You are charged at checkout and we email you the moment it is on its way.

Does it fit a manual FG?

Not yet. The overlay's thickness stops the manual shift boot retainer clipping back in. A manual version is planned, with no date yet.

Does it fit both FG and FG-X?

Yes, on automatics. The console shape is the same across both in this area.

Can I take it off later?

Yes. The factory trim is untouched underneath. Warm the tape with a hair dryer and lift it slowly.

Will it lift in summer heat?

Not if the surface was clean and dry when it went on. The tape is the same class of adhesive used on factory trim and badges.

Is it real carbon or a wrap?

Real carbon fibre prepreg under a UV resistant clear. No vinyl, no plastic with a carbon print.

Browse the rest of the Ford Falcon FG and FG-X parts to keep building out the cabin.

In-stock parts dispatch from Perth within 1 to 2 business days, insured and tracked. Free shipping on orders over $550 (bulky items excluded). Unused, uninstalled parts can be returned within 14 days of delivery, a 10% restocking fee applies.